Sometimes you need to run a serial terminal program on an embedded device to check from your shell how a connected serial device is answering on characters beeing send to it.
Below we describe how to compile the simple Linux terminal program miniterm
and use it on a Digi ConnectCore module or the Digi Connect ME 9210 running Linux.
Get the miniterm source code from the web. Just search for lpg-0.4.examples.tar.gz
or try getting it from ftp://sunsite.unc.edu/pub/Linux/docs/LDP/programmers-guide/
Deflate it in any working directory:# tar -xzf lpg-0.4.examples.tar.gz
# cd lpg-0.4.examples
Patch the sources to your needs, e.g.:#define BAUDRATE ...
#define MODEMDEVICE "/dev/ttyS1"
Where the /dev/tty*
should match the device you want to connect on your embedded module.
Compiling it is very simple:# /usr/local/DigiEL-*/usr/bin/arm-linux-gcc miniterm.c -o miniterm
Deploy it into the embedded modules root directory, either by adding it to the add_files.sh
of your project or to rootfs/rootfs_base
, or if you just want to test it once:# ftp yourmodule-ip
user: root, password: root
# cd /usr/bin
# put miniterm
Then login either via console or telnet or ssh and just start it:# miniterm
Any character is directly send to the tty
you specified in MODEMDEVICE
(without local echo) and you will see any char coming from the connected device.